BLOCKsignalling DAP1-NS Infra-Red Control Module for Dapol Semaphore Signal

Description

BLOCKsignalling DAP1-NS Infra-Red Control Module for Dapol Semaphore Signal
This product data sheet is originally written in English.
Listing Template 2018
Home
About Us
Returns
Feedback
Contact Us
A quick and easy way to add automation to your Semaphore signals. Controlling Dapol semaphore signals has never been easier. Only 4 wires to connect and you are up and running. No soldering or programming required (but you can adjust things if you want to). We love semaphore signals. There are some very realistic kits from Ratio which can be operated by rod and wire, or by servos, or ready built models from Dapol for 00 and N gauges which have a motorised actuator in the base. The actuator is powered from a 16V AC supply connected to the red and black wires, although many modellers use a 12V DC supply without any problems (just make sure the positive connection is to the red wire otherwise the signal lamp will not light).
To operate the signal the two remaining yellow wires are briefly shorted together using a miniature push-button switch or similar. We were keen to provide a solution that would add some simple automation of the signals on a model railway layout, without the need for soldering, programming or making any additional connections. The four terminals on the module accept the four wires from the signal, with the power feed doubling up on the first two terminals. Simply drill an 8mm hole through the baseboard between the sleepers and insert the sensor from below (the sensor only needs a 2mm gap to see between the sleepers so there should be no problems with N gauge). Invisible infra-red light is projected upwards and any trains passing overhead will Trigger the circuit and will operate the signal automatically. You can test this by waving your hand over the sensor, and the signal should operate (if it doesn~t work as expected, just swap over the two yellow wires).
Disclaimer
View Our Categories
About Us
Hello and welcome to Golden Valley Hobbies, the place to find the best model rail scenery and accessories.
Starting as a small business in Herefordshire in 1999, we've come a long way, so we know exactly which direction to take when supplying you with high quality products. We offer all of this while providing excellent customer service and friendly support.
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it 2-5 days after dispatch for orders sent by Royal Mail 48.
Returns
We want you to be 100% delighted with your purchase and that's why we offer a 30-day, hassle free return period.
However; if the item is damaged or faulty, then you will not be responsible for the return postage.
Contact Us
If you require any help with your order, please don't hesitate to contact us via eBay message.
You will get an answer back from us within 1 working day
Home
About Us
Returns
Feedback
Favourites
Home About Us Returns Feedback Contact Us A quick and easy way to add automation to your Semaphore signals. Controlling Dapol semaphore signals has never been easier. Only 4 wires to connect and you are up and running. No soldering or programming required (but you can adjust things if you want to). We love semaphore signals. There are some very realistic kits from Ratio which can be operated by rod and wire, or by servos, or ready built models from Dapol for 00 and N gauges which have a motorised actuator in the base. The actuator is powered from a 16V AC supply connected to the red and black wires, although many modellers use a 12V DC supply without any problems (just make sure the positive connection is to the red wire otherwise the signal lamp will not light). To operate the sig
MPN
DAP1-NS
Brand
BLOCKsignalling
Gauge
OO
EAN
619271536561