Ford Powerstroke Diesel 6.0 bypass oil filter 2003 to 2007 Fits coolant filters

Description

THIS KIT DOES WORK WITH ALL THE POPULAR COOLANT FILTERS, PICS SHOWN WITH XDP COOLANT FILTER, KIT COMES WITH 45 DEGREE FITTING FOR THE FRONT OF YOUR COOLANT FILTER TO DIRECT THE FRONT HOSE AWAY FROM THE OIL BYPASS FILTER. 07-10-2020
ALSO: If you put both oil bypass and coolant bypass filters on the same bracket it's going to break.
DOUBLE YOUR OIL CHANGE INTERVALS (MINIMUM SAFELY)
WORRY FREE FUEL INJECTOR LIFE
Standard oil filter are 25 to 35 microns and the Amsoil filter that comes with the kit is 1 micron so it is cleaning your oil at least 25 times better it just does it slower. (.032 orifice)
Will not work with some aftermarket alternators (230 amp Leece Neville does not work)
All kits ship with EABP90 Amsoil bypass filter (15 Qt. capacity)
1. Look at the rest buy the best (O.C.S.)
2. No cutting or drilling, ask our competition about this
3. All 9 of our kits add 10 minutes to an oil change to completely install,
because we assemble everything that can be, not a box of loose parts.  No one else does this.
4. Only powder coated bracket on the market
5. Only clear pvc cover over stainless steel braided Teflon tube hoses
6. We sell all parts separately for DIY and spares, others will not sell any spares even if you bought a kit and had a problem and needed another part you would get to buy another kit
7. We take trade in's if you upgrade or change trucks
8. Pays for itself in 3 to 4 oil changes, by doubling the oil change interval mileage and the oil is cleaner than it was at half of this doubled mileage.
All kits now shipping with clear or smoked pvc cover over hoses installed when assembled under crimped sleeve, will not scratch any other surface if laid on it and keeps it's shine. THEIR IS A DIFFERENCE Oil Charge System parts except fittings, gauge and fasteners made in the USA We use steel threads at all fastening points, hose ends, filter head to bracket threads and most important the filter to filter housing thread Don't change your oil as often keep it clean, with EGR valves on diesels it only makes sense.  Keep the soot out of the oil with this simple to install kit, (takes ten minutes to install). The Amsoil one micron filter is the key to this system. Comes with billet aluminum oil filter cap and oil filler cap with fittings installed ready to go. Black powder coated bracket and new style black powder coated filter head, black anodized filter cap, and fill cap, with smoked black pvc cover over stainless steel braided lines with teflon tube hoses. Extended oil changes 20.000 miles with standard diesel oil, and 60.000 miles with full synthetic oil, changing the full flow filter every 5.000miles and topping off oil. If you use the Amsoil or Blackstone labs testing program these and much longer intervals are possible.Simple to install remove two bolts on alternator put on bracket, screw on filter, remove stock oil filter cap and oil fill cap, replace with supplied caps, put on hoses.
The key to the system Amsoil EABP90 bypass filter one micron filtering. FREE SHIPPING USPS IN THE USA.  Four of the seven kit's we offer are not vertical filter mount but horizontal, people think their will be a mess when changing the filter and the flow may not work properly, not so all you do when changing the filter is use a couple of Walmart bags or a 1 gallon zip-lock bag over filter before unscrewing it, and the Amsoil web site shows in filter mounting instructions that 3 to 9 o'clock are approved mounting positions.
Thanks Jim / OCS