Forge Motorsport Intake for Ford Fiesta ST MK8 Ford Puma FMINDK38 Induction Kit

Description

Pages
About Us
New In Stock
View Feedback
Visit Shop
About Us
Feedback
Add To Favourites
Contact Us
We have the parts you need
Forge Motorsport Intake for Ford Fiesta ST MK8 Ford Puma FMINDK38 Induction Kit
View Motor Bling Feedback
Product Description
The FMINDK38 is the cold air induction system for Ford’s latest generation 1.5-liter 3-cylinder ST engine. Like with all manufacturers in recent times the need to make smaller engines more efficient and more powerful has been an engineer’s top priority, this then creates a problem for the aftermarket manufacturers to improve what is already fitted to the vehicle, nevertheless this hasn’t stopped us at Forge Motorsport.
A large amount of knowledge and knowhow from past development with all Ford models was available to us, however this is a totally new power unit and we needed to spend an extensive amount of testing time to ensure we ended up with a product that gives genuine improvements over the standard air box.
The choice of filter was decided after weeks of real-world testing and hours on the dyno experimenting with different filter options. We found that our Forge pleated filter worked best with an increase in power and torque while maintaining the best filtration properties, the build quality of the filter is superb and carries a limited lifetime warranty. This performance filter has been designed with a high quality silicone coupling and W2 Stainless Steel hose clamps to join the anodized black machined billet velocity stack. The filter is made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow.
The use of the velocity stack MAF sensor housing maximises as much smooth air flow as possible. Our skilled CAD engineers have simulated different MAF sensor housing models to create the best design for this kit. The illustrations below demonstrate the benefit of using velocity stack science and show the smoothed air flow into the MAF sensor housing and inlet tract from the air filter.
With the combination of both the filter and MAF sensor housing we saw total gains of 4bhp however this only tells half the story, if you study the data from the dyno graph you can see the increase in torque from 1500-3000 RPM and again at 4500 until the red line, in fact at 2200 RPM gains of 20NM are achieved. This is also the same with the BHP power figures, you are seeing gains sooner and at the latter stages of the rev range, making the engine perform stronger when you need it to. On a tuned vehicle this combination is an essential purchase as the OEM air box is found to be too restrictive to achieve the optimum power figures and smooth power delivery.
As a bi-product from FMINDK38 the acoustics from the 1.5 engine have been improved, there is now a purposeful induction roar under hard acceleration and a very addictive turbo flutter when you lift off the throttle. Not only to improve the aesthetics but to aid as a heat defence from the hot engine, we have provided a laser cut and powder coated aluminium shield, this surrounds the filter and incorporates the OEM air ducting to direct cold air to the intake.
This kit can be installed to the OEM intake pipe or can be paired with our own silicone intake pipe
FMINLH21
, the key here is to further smooth the airflow to the turbo and eliminate any metal pipework as this is susceptible to greater heat soak and a potential loss in power.
A commonly asked question is will this fit any other aftermarket or the inlet hose intake? The answer is yes it will fit other manufacturers inlet hoses and fits to the original Ford inlet hose.
MAF Boss Manufactured from 6082 aerospace grade aluminium.
Black anodised & powder coating for ultimate protection and durability.
Forge Pleated performance air filter which has been designed with a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow.
No engine management lights (EML)
Increased air flow
Limited Lifetime warranty
Engine Bay Products
Browse Stock
Dump Valves
Browse Stock
EBC Discs & Pads
Browse Stock
About Us
We are a family run business started back in 2004 offering car customising and performance products from top brands such as Forge, K&N, Bailey, Wossner, Walbro, Gaz, The Loudest and many more.
We also have products manufactured for ourselves and these are made to the highest standards. Buying from us means you buy directly from the importer, so are prices are always the best.
Over the past 9 years here at Motorbling we have also expanded our product range into standard replacement parts such as Brakes Pads from EBC and Wing Mirrors from Lucas, so we can now offer everything you need, from customising, to performance to standard replacement parts for MOT'S and general repairs.
We offer fantastic service and discounted prices so why shop anywhere else.
All products are shipped with tracking and insurance, so in the event of loss or damage, your purchase is totally covered (simply e-mail us through eBay messages to let us know the item has arrived damaged or has not arrived)
We will notify you by e-mail when the item has been shipped, so there is no need to contact us.
If an item does not arrive within 7 days of receiving the despatch e-mail (please allow up to 14 days if buying from Europe or the Rest of The World) then feel free to contact us through eBay messages so we can assist you with this.
Please remember when leaving feedback and seller star scores you are judging us on dispatch time and not the postal company used.
Returns Policy
30 Days Returns Guarantee If we have made a mistake, please contact us so we can resolve the issue immediately. For most items, you have the right to return your goods within 30 days of receiving them. However, this right does not apply to items that have been altered upon request, have missing labels or show signs of being used. If you wish to return goods using this right, you need to inform us within 21 days of receiving the goods. You must take reasonable care of the goods and immediately return them at your own expense. Please ask for a "Proof of posting certificate" as we cannot be held responsible for goods that go missing whilst in transit. If you think we’ve sent you the wrong item or size, please double check the full description in the listing, including the UK size before requesting a return. If you have incorrectly ordered the wrong item we can exchange the item subject to stock availability, however additional postage charges will apply. To request a return please submit the request using the contact us form/ Site Returns process. Our returns address will be provided. To request an exchange please contact us through our contact page. Thank you.
Have a Question? Get in touch!
Add To Favourite Sellers
Engine Bay Products
Forged Pistons
Fuel Hose & Fittings
Remus Exhausts
Power Boost Valves
Visit Shop!
30 Days Returns Guarantee If we have made a mistake, please contact us so we can resolve the issue immediately. For most items, you have the right to return your goods within 30 days of receiving them. However, this right does not apply to items that have been altered upon request, have missing labels or show signs of being used. If you wish to return goods using this right, you need to inform us within 21 days of receiving the goods. You must take reasonable care of the goods and immediately return them at your own expense. Please ask for a "Proof of posting certificate" as we cannot be held responsible for goods that go missing whilst in transit. If you think we’ve sent you the wrong item or size, please double check the full description in the listing, including the UK size before reque