Jeep PTO / power takeoff  / Ramsey Winch Co.

Description

This PTO was built by Ramsey Winch Co. of Tulsa, Ok.
It is designed to bolt directly to the underside of the Dana Spicer model-18, Jeep transfer case.
This style of PTO is much stronger than the type that bolts onto the back side of the transfer case.
From the information that I have gotten from the internet, this fits Jeeps from 1940 thru 1971.
The mounting bolts are included.
The shaft rotates freely and the gear is in good condition.
The shifting rod is mounted to the side of the housing by two aluminum pivot mounts.
These both have a grease fitting in them but it is obvious that they were not greased regular.
As a result, the shaft does not rotate in those two mounts.
.... I removed the linkage bolt and the gear slides over as it should ( see last two photos ) ...
NOTE :
Please look at the photos for an accurate determination of the condition.
Please email me with any questions and be sure to look the photos over good before you bid.
If you prefer to pick this up, you can pay for it then with cash instead of using PayPal.
This is too large a package to combine shipping with anything else.