Probe for operating turnout motors (use with PL-18) Peco PL-17

Description

Probe for operating turnout motors (use with PL-18) Peco PL-17
Brand:
Peco
Product number:
PL-17
Gauge/scale:
Suitable for several scales
Material:
Mix
Finish:
n/a
Probe for operating turnout motors (use with PL-18)
A simple yet effective method of switching turnouts. The PL-18 Studs are inserted into the control panel, often laid out as a layout diagram. A wire is then soldered to the tag at the back, which goes to the relevant solenoid of the turnout motor. When power is applied by touching the powered PL-17 probe on the stud the Turnout Motor is activated.
Recommended to be used with:
PL-18 Studs and Washers
PL-10 Turnout Motors
Buy with confidence as this listing is linked to our
model shop on the Isle of Wight.
Probe for operating turnout motors (use with PL-18) Peco PL-17 Brand: Peco Product number: PL-17 Gauge/scale: Suitable for several scales Material: Mix Finish: n/a Probe for operating turnout motors (use with PL-18) A simple yet effective method of switching turnouts. The PL-18 Studs are inserted into the control panel, often laid out as a layout diagram. A wire is then soldered to the tag at the back, which goes to the relevant solenoid of the turnout motor. When power is applied by touching the powered PL-17 probe on the stud the Turnout Motor is activated. Recommended to be used with: PL-18 Studs and Washers PL-10 Turnout Motors Buy with confidence as this listing is linked to our model shop on the Isle of Wight.