Speedway Motors Pro Ring & Pinion Rear End Backlash Setup Tool Set Kit

Description

Most accurate ring and pinion tool available, Uses the same bearing the carrier uses to ensure proper center line to pinion measurement, Does not assume that the cap is on the center as other tools do, Comes complete with indicator to set backlash, wooden storage box, and instructions on proper usage, Works on GM 10 and 12 bolt, 8.8" and 9" Ford, 8.25 and 8.75 Mopar, Danas with lower number than 60 and most other passenger car rear ends and small trucks
Speedway Professional Rear End Ring & Pinion Axle Setup Tool Set
Sku # 91082725
Mfr. Part # 91082725
Condition
New
Brand
Speedway Motors
Sold
Set
Details
Info
The most accurate ring and pinion set up tool available. It uses the same bearing the carrier uses to insure proper center line to pinion measurement. Does not assume that the cap is on the center as other tools do.
Comes complete with indicator to set back lash, wooden storage box and instructions on proper usage.
Works with 9" Ford and GM 10-bolt/12-bolt applications.
Charts
(pdf)
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
Specs
Sold in Quantity
Set
MFG. Part #
91082725
Reviews
A++
Rated
by Mike572 on March 27, 2021
Summary:
Definitely a quality piece of equipment.
Yes, I recommend this product.
Speedway Professional Rear End Ring & Pinion Axle Setup Tool
Rated
by Drag racer on January 11, 2021
Summary:
The dial gauges are easy to read and adjust and are good quality the mechanisms that holds the gauges in place holds well. Every thing is of high quality. It comes in a nice wood storage box that holds every thing in place. Print the directions from speedway motors site when you look up the tool discription, the direction sheet that comes with it in the box is very scetchy there are also three pictures included that are a big visual help when setting up.If you have experience reading a dial gauge it would help a lot when using this tool. The pictures are taken with the tool set up on an open 9" ford differential. I used this tool to set up a ford 9" removable carrier, Advice! the 1" number comes from the added length of the pinion hub that fits in the carrier bearing in the case,add that number to the dial # to get your reading( 1.029") example.On the removable carrier you can not rest the tool measuring end on the pinnion flat surface because of the support housing you have to set it up on the top of the pinnion hub. This measuring tool works good on eather one and is a great time saver. Instead of trial and error guessing on the shim or shims thickness needed on the pinnion support housing.
Cons:
the directions are written not for the novice!
Pros:
It is a quality made tool!
Yes, I recommend this product.
I waited way to long to get this
Rated
by Mark on November 26, 2020
Summary:
Very accurate
Works well, only 1 issue.
Rated
by mikesmiel on April 04, 2020
Summary:
As indicated" works on most cases". Dogbone does not work well on aftermarket 9" case. Casting on Strange case is more beefy at rear pinion support and dogbone does not clear it. I'll make one that will fit out of bar stock.
Yes, I recommend this product.
Great customer service.
Rated
by Offensive Engineering on April 02, 2020
Summary:
They even included photographs of how the tools work. I had never used this before so it was a big help.
Yes, I recommend this product.
Related Items / Suggested Parts
Ford 9 Inch Econo Ring & Pinion Set-Up Tool Kit
DVD - Richmond Gear Installation Instruction
Adjustable Pinion Yoke Tool
Assembly Stand for 9 Inch Ford Differential
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.