Viessmann 5224 Control Modules for Light Signals # New Boxed #

Description

Viessmann 5224 control module for light signals
NEW in original packaging!
This module has an integrated digital decoder (Märklin-Motorola, NMRA-DCC) and is used to control 2 light signals (a main and a distant signal) with LEDs and a common positive pole or incandescent lamps if they do not consume more than 200 mA of current together. Prototypical soft signal aspect change. Suitable for all light signals from track 0 to Z (except signals with multiplex technology). The switching can be carried out conventionally using the button control panels Art. 5545, 5546 and 5547 or directly digital. It is equipped with the Viessmann signal bus and can be configured for the following applications: 2-aspect or multi-aspect light signal: A 2-aspect main signal with the signal aspects go and stop requires the button control panel item no. 5547 (for 4 signals) or a digital address. A 3- or 4-aspect signal with the additional terms Slow travel and Maneuvering prohibited requires the button control panel Art. 5546 (3-aspect, 2 signals) or 5545 (4-aspect, 2 signals) or 2 addresses in digital mode. Train station signal or block signal: When configured as a block signal, the module reacts automatically to the transmitted route status. This function requires track occupancy reports with permanent contacts. Up to 2 monitored sections are required for each signal section. In this operating mode, the module automatically switches to travel if the following section is reported as free via the signal bus. If one of the two sections is occupied, the module switches to halt. Own distant signal or distant signal on the mast: The signal module controls the main signal and the associated distant signal or the distant signal of a following signal if it is attached to its own mast. In this case, the distant signal is switched off prototypically when it stops. At a standstill, interrupt the traction current or switch on the brake generator: With the pluggable train control relay Art. 5228 the module can stop the trains automatically. This can either be done by switching off the traction current before the signal or, in the case of digital systems, even more prototypically, by switching to the brake module Art. 5232 (for Märklin-Motorola) or a brake generator (for NMRA-DCC). Coupled signal: The configuration can be used to specify whether a signal should only display stop and slow travel. In this case, the module also only requires the button control panel Art. 5547 or a digital address. The logic in the control module ensures that the red button always wins when several buttons are pressed at the same time, both when controlling via button control panels and via contact rails.
The buyer bears the shipping costs.
This module has an integrated digital decoder (Märklin-Motorola, NMRA-DCC) and is used to control 2 light signals (a main and a distant signal) with LEDs and a common positive pole or incandescent lamps if they do not consume more than 200 mA of current together. Prototypical soft signal aspect change. Suitable for all light signals from track 0 to Z (except signals with multiplex technology). The switching can be carried out conventionally using the button control panels Art. 5545, 5546 and 5547 or directly digital. It is equipped with the Viessmann signal bus and can be configured for the following applications: 2-aspect or multi-aspect light signal: A 2-aspect main signal with the signal aspects go and stop requires the button control panel item no. 5547 (for 4 signals) or a digital add